uni_one

Kommunikation

02.07.2021

02.07.2021 | ATTENTION IMPORTANT NOTICE to all magis40 Licensees
Minerbe, 02.07.2021 ATTENTION IMPORTANT NOTICE to all magis40 Licensees Dear Customer, we would like to inform you that in the latest updates of the ProF-2 software, the glass measures of the magis40 opening sash have been erroneously increased by 5mm, therefore they are not to be considered correct. Please check carefully the measures of the […]
die Mitteilung lesen
30.06.2021

30.06.2021 | Useful e-mail addresses
Minerbe, 30.06.2021 Useful e-mail addresses Dear Customer, in order to optimize the service and avoid unpleasant misunderstandings, we remind you to address your requests to the following e-mail addresses: preventivi@uniform.it → for quote requests of Wood-Aluminum and Wood-Bronze systems , uni_shade, uni_one; ordini@uniform.it →  for entering new orders; confermaordine@uniform.it → to send order confirmations and/or modifications; […]
die Mitteilung lesen
15.06.2021

15.06.2021 | magis40 selected ADI Design Index 2020
Minerbe, 15.06.2021 magis40 selected ADI Design Index 2020 Dear Customer, we are proud to announce that magis40 has been selected for the prestigious ADI Design Index 2020, the annual selection of the best Italian design, in the category „Design of materials and technological systems“. Due to the pandemic, the selection announcement was held on Thursday, […]
die Mitteilung lesen
13.05.2021

13.05.2021 | Fulfilment of your oders before our summer holidays 2021
Minerbe, 13.05.2021 Fulfilment of your oders before our summer holidays 2021 Dear Customer, herewith we inform you that UNIFORM S.p.A. will be closed for summer holidays from August 9th to August 20th included. In order to fulfil your orders before our closure for summer holidays, here below please find the deadline for sending them:   […]
die Mitteilung lesen
07.05.2021

07.05.2021 | Technical catalogue update of uni_one magis40 and HS magis40 systems
Minerbe, 07.05.2021 Technical catalogue update of uni_one magis40 and HS magis40 systems Dear Customer, please find here below technical updates: UNI_ONE HS MAGIS40: Introduction of QR code with video tutorial of lift-and-slide assembly instructions (see pag. 36 of technical catalogue). Click here to view the updated technical catalogue. UNI_ONE MAGIS40: Division of the documentation into 3 files […]
die Mitteilung lesen
15.04.2021

15.04.2021 | INOX finish on aluminium profiles/frames and alu sheets
Minerbe, 15.04.2021 INOX finish on aluminium profiles/frames and alu sheets Dear Customer, we would like to inform you that the price of aluminium profiles/frames and alu sheets with stainless steel (INOX) finish included in folder no. 4 (oxipulver/oxidised) will be calculated according to specific quotation for each project. The INOX finish is available in two […]
die Mitteilung lesen
06.04.2021

06.04.2021 | System upgrade: AGB HS-Slim 50
Minerbe, 06.04.2021 System upgrade: AGB HS-Slim 50 Dear Customer, please find here below technical update: SYSTEM UPDATE: AGB HS-Slim 50 the technical drawings for the new Agb HS-Slim lift-and-slide system are now available for the thicknesses  68, 78 and 92mm. CLICK HERE TO DOWNLOAD THE FILES This update does not apply to uni_one systems. Thank […]
die Mitteilung lesen
16.03.2021

16.03.2021 | New BIM library 
Minerbe, 16.03.2021 New BIM library  Dear Customer, we are pleased to inform you that the download area of the uni_one website is online with a new graphic layout. To simplify navigation we have divided the area into three sections: technical, commercial and a new area dedicated to the BIM-CAD library.   The BIM section contains a new […]
die Mitteilung lesen
03.03.2021

03.03.2021 | Double-sided adhesive tape for tinted transparent wood
Minerbe, 03.03.2021 Double-sided adhesive tape for tinted transparent wood Dear Customer, Herewith we inform you that we have developed a double-sided tape for wood-glass bonding to be used with tinted transparent wood. The new double-sided adhesive tape (code LCN20-2BT) can be used on all the wood finishes of the NATURA box, i.e. on tinted transparent oak veneer […]
die Mitteilung lesen
12.02.2021

12.02.2021 | Assembly instructions for georgian bars update 
Minerbe, 12.02.2021 Assembly instructions for georgian bars update  Dear Customer, we have introduced the use of a special 2K adhesive, if necessary supported by special brackets, which allows a reinforcement adhesion in critical points on profiles used as muntin bars on the door. Adhesive materials are managed as consumables, namely they will not be included […]
die Mitteilung lesen
04.02.2021

04.02.2021 | HS-magis40 technical update
Minerbe, 04.02.2021 HS-magis40 technical update Dear Customer, please find here below HS-magis40 technical update: HS-MAGIS40 TECHNICAL CATALOG UPDATE introduction of the new sash cover plate kit customized with magis40 logo (pages 62-63). The software update will be available from next week;   Online video of assembly instructions (see page 36). Click here to watch the […]
die Mitteilung lesen
02.02.2021

02.02.2021 | Uniform: new Contract Division
Minerbe, 02.02.2021 Uniform: new Contract Division Dear Customer, Uniform’s commercial strategies speeded up the promotion of uni_one and magis40 to architectural firms, thus rising the need to set up an office being a trait d’union between professionals and uni_one licensees. The Contract Division or Di.Co. draws its strength from the experience and technical expertise of […]
die Mitteilung lesen
17.12.2020

17.12.2020 | Hydro-Oil Finishes
Minerbe, 17.12.2020 Hydro-Oil Finishes Dear Customer, we are pleased to inform you that Uniform has extended the range of uni_one wood part finishes with two HYDRO-OIL solutions: Ginger and Turmeric finishes. HYDRO-OIL protects the natural beauty of the wood giving a very materic and refined effect. HYDRO-OIL is supplied in convenient cans and you can easily […]
die Mitteilung lesen
04.12.2020

04.12.2020 | Closure for national holiday December 8th 2020
Minerbe, 04.12.2020 Closure for national holiday December 8th 2020 Dear Customer, Herewith we inform you that UNIFORM S.p.A. will be closed on December 7th and 8th 2020. We will resume regular business hours, Wednesday, December 9th 2020. Thank you for the attention, best regads. Uniform SpA Franco Tenzon Chairman of the Board
die Mitteilung lesen
04.12.2020

04.12.2020 | magis40 digital materials
Minerbe, 04.12.2020 magis40 digital materials Dear Customer, We know that communication is an important factor in the life of a company and that it becomes fundamental in the presentation of a new product. This is why Uniform makes available to its magis40 customers a package of „ready-to-use“ digital materials to communicate the magis40 project effectively, both […]
die Mitteilung lesen
12.11.2020

12.11.2020 | magis40 technical catalog update
Minerbe, 12.11.2020 magis40 technical catalog update Dear Customer, please find here below magis40 technical update: MAGIS40 TECHNICAL CATALOG UPDATE The perimetral gasket  DE183 has been added  for FD675 and FD676 profiles and the gasket DE48 has been added (for FD674 profile); Details regarding the method of gluing the georgian bars to the glass; Resume update;  The […]
die Mitteilung lesen
03.11.2020

03.11.2020 | New finishes box NATURA 2021
Minerbe, 03.11.2020 New finishes box NATURA 2021 Dear Customer, starting from November 16th, 2020, the new NATURA box will be available and expanded with two main categories: painted finishes and tinted transparent finishes. MATT PAINTED FINISH (supply mode: pre-assembled frames or bars) – 7 finishes divided into 3 painted on pine base and 4 on […]
die Mitteilung lesen
06.10.2020

06.10.2020 | Fulfilment of your orders before our Christmas holidays 2020
Minerbe, 06.10.2020 Fulfilment of your orders before our Christmas holidays 2020 Dear Customer Herewith we inform you that UNIFORM S.p.A. will be closed for Christmas Holidays from Thursday, December 24th  2020 to Wednesday, January 6th 2021, included. We will resume regular business hours, Thursday, January 7th 2021. In order to fulfil your orders before our closure, […]
die Mitteilung lesen
28.09.2020

28.09.2020 | Warning fraudolent emails
Minerbe, 28.09.2020 Warning fraudolent emails WARNING!  FOR YOUR OWN PROTECTION! Important notices of recent fraudulent emails targeting financial transactions Dear Customer, This letter is to warn you of the recent incidences regarding strange emails with ultimate criminal fraudulent purposes on financial transactions. We are taking the precaution of asking you to please NEVER accept a […]
die Mitteilung lesen
22.09.2020

22.09.2020 | uni_one updates
Minerbe, 22.09.2020 uni_one updates Dear Customer, below are some technical and commercial updates. UPDATE OF PROF-2 SOFTWARE In ProF-2 software, in bars suppling mode, is now possible to choose lacquered bars with the double-sided adhesive tape already applied. The raw oak veneer bars will be supplied without the housing of gasket which is replaced by […]
die Mitteilung lesen
27.08.2020

27.08.2020 | HS-magis40 technical update
Minerbe, 27.08.2020 HS-magis40 technical update Dear Customer, please find here below the technical update of HS-magis40. UNI_ONE HS-MAGIS40  introduction of the new LC194 kit for the door trolleys, with stainless steel covers and concealed door stopper. Thank you for the attention, best regads. Uniform SpA Franco Tenzon  Sole Administrator
die Mitteilung lesen
25.08.2020

25.08.2020 | magis40 visual book
Minerbe, 25.08.2020 magis40 visual book Dear Customer, we are pleased to inform you that the new magis40 visual book is available with different solutions for setting up your show room. Developed with the collaboration of architect Giorgio MassimilianoMarchesi, the visual book will support you in choosing the most suitable concept for your spaces with a […]
die Mitteilung lesen
06.08.2020

06.08.2020 | magis40 and HS-magis40 technical update
Minerbe, 06.08.2020 magis40 and HS-magis40 technical update Dear Customer, please find here below the update of technical catalogue. TECHNICAL CATALOG UNI_ONE MAGIS40 ED.21/07/2020 https://www.sistema-uni-one.it/wp-content/uploads/2020/04/uni_one-tech_Magis40.pdf technical data sheet update, and feasibility table addition of alternative solutions (AF, IBS, OBS) for the construction of FIXED LIGHTS addition of the kit for crimping the LA690 alu profile corners […]
die Mitteilung lesen
19.06.2020

19.06.2020 | Fulfilment of your orders before our summer holidays 2020
Minerbe, 19/06/2020 Fulfilment of your orders before our summer holidays 2020 Dear Customer, At this particular moment in time, after many weeks of lockdown, the slow recovery requires the highest flexible service to meet our customers’ needs. Uniform has decided to stop its business activity in week 33 and 34, from August 10th to August […]
die Mitteilung lesen
25.05.2020

25.05.2020 | Protocollo40
Minerbe 25/05/2020 Protocollo40 Ask to your sales representative for more information. Thank you for your kind attention, best regards. Uniform SpA Franco Tenzon Sole Administrator
die Mitteilung lesen
13.05.2020

13.05.2020 | magis40: finally free
Minerbe 13/05/2020 magis40: finally free Great freedom of customization, extreme minimal lines, excellent performance: these are the features of magis40, the new system created by Uniform with uni_one technology.  An unprecedented technological challenge.   Light is the new protagonist of the rooms. In magis40, the visible section of the window sash is only 40mm, which increases the glass […]
die Mitteilung lesen
29.04.2020

29.04.2020 | Be Uniform, Be social
Minerbe, 29.04.2020 Be Uniform, Be social Dear Customer, in a constantly changing market, where everything happens quickly, it is essential to communicate in the same quick way. For this reason, in line with the new Uniform strategic vision in communication, more direct and immediate, we have launched a renewed and more structured social media activity. […]
die Mitteilung lesen
11.04.2020

11.04.2020 | Restart of production activities
Minerbe, 11.04.2020 Restart of production activities Dear Customers and Suppliers, as per Government decree of 10th April 2020, we are pleased to inform you about the gradual restart of our production activities from Wednesday 15th April 2020. We are working to ensure that our departments return to full capacity already from the following week and therefore […]
die Mitteilung lesen
14.03.2020

14.03.2020 | Temporary closure of production activities Uniform SpA
Minerbe, 14.03.2020 Temporary closure of production activities Uniform SpA Dear Customers and Suppliers, after careful evaluations and on the basis of the decisions made by the Competent Authorities on the diffusion of COVID-19, Uniform S.p.A. has decided to suspend the production activities of its Italian plant from Monday 16 until Friday 27 March 2020: a […]
die Mitteilung lesen
09.03.2020

09.03.2020 | Uniform’s activity continues unaffected
Minerbe, 09.03.2020 Uniform’s activity continues unaffected Dear Sirs, The emergency news recently released is of concern, but Uniform is tackling the challenges head-on. We have in fact taken extraordinary measures in terms of safety and hygiene in order to maximise internal health and continue our work without any interruption. Uniform continues with the full support […]
die Mitteilung lesen
21.02.2020

21.02.2020 | New gasket DE174
Minerbe, 21.02.2020 New gasket DE174 Dear Customer, we kindly ask you to read the update below. DE107 is replaced by the new article DE174. The new gasket has the same characteristics as the previous one but its insertion and sealing inside the aluminum has been improved.  Gasket DE107 will be supplied until the stock is […]
die Mitteilung lesen
20.01.2020

21.01.2020 | uni_one Technical Catalogue update
Minerbe, 21.01.2020 uni_one Technical Catalogue update    Dear Customer, We kindly ask you to read the update of our UNI_ONE technical catalogue below. uni_one Coplanar and Flat systems:  Two new profiles, LA1188 and LA1189, have been introduced for the assembled frames. The conformation of the two new profiles allows an even more precise and aesthetically […]
die Mitteilung lesen
19.12.2019

CIRC. 21/2019 | Non-Compliance Form
  CIRC. 21/2019 Minerbe, December 19th 2019 REF.:Non-Compliance Form Dear Customer, In order to guarantee a service increasingly oriented to full customer satisfaction and to facilitate the acquisition and monitoring of non-conformities, we realized a non-compliance registration form to collect completely and clearly all the information necessary for relevant registration and fulfilment. The form is available for download […]
die Mitteilung lesen
25.11.2019

CIRC. 20/2019 | uni_one Technology – The new website is online
  CIRC. 20/2019  Minerbe, 25/11/2019   REF: The new uni_one website is online Dear Customer, we are pleased to inform you that the new uni_one website is online! The domain www.sistema-uni-one.it remains unchanged even if there has been a restyling of the contents with the introduction of the concept of uni_one Technology: the technological production […]
die Mitteilung lesen
18.11.2019

CIRC. 18/2019 | Price list update 2020
  CIRC. 18/2019 Minerbe, November 18th 2019 REF.:Price list update 2020 Dear Customer, Uniform has absorbed the rising of labour and prime material costs over the last two years, maintaining the price list unchanged since 2018. This has all been possible thanks to everyday work and continuous efforts of the whole staff intended to identify […]
die Mitteilung lesen
18.11.2019

CIRC. 19/2019 | EMO update (Extra for Minimum Order)
  CIRC. 19/2019 Minerbe, November 18th 2019 REF.:EMO update (Extra for Minimum Order) Dear Customer, herewith we inform you that starting from January 1st 2020, EMO will applied as follows: For Orders developed by our Technical office with a total net amount (carriage and packaging costs excluded) below € 200,00 we will invoice an extra […]
die Mitteilung lesen

Finde einen Produzenten

Werde Produzent

Finde einen Produzenten

Werde Produzent